Electric Hob Repairs: How to Fix Common Problems Fast

If your electric hob has stopped heating or is acting weird, you don’t have to panic. Most issues are caused by a few simple things you can check yourself before calling a professional. In this guide we’ll walk through the most common faults, safe DIY steps, and when it’s time to bring in the Nuneaton Appliance Repair Experts.

Spotting the Common Faults

First, figure out what’s actually wrong. Here are the top complaints we hear:

  • Burner won’t heat: The element may be burnt out or the connection loose.
  • Uneven heating: One side of the plate gets hot while the other stays cool – often a faulty thermostat.
  • Flickering or blank display: Could be a loose wire, a bad control board, or a tripped circuit.
  • Tripped MCB or blown fuse: Over‑current protection trips when there’s a short inside the hob.
  • Strange smells or smoke: Stop using the hob immediately – it signals a serious electrical fault.

Knowing which symptom you have helps you decide whether a quick DIY fix will do or if you need a pro.

Safe DIY Checks You Can Do Today

1. Reset the breaker. Go to your consumer unit and flip the relevant switch off, then on again. If the hob works, the issue was a temporary overload.

2. Inspect the element. Turn the hob off, unplug it, and remove the element (most models have a simple clip). Look for visible cracks or burnt spots. A cracked element needs replacing – you can buy a replacement online with the model number.

3. Clean the contacts. Over time food debris can sit on the metal contacts under the element. Use a soft brush and a little baking‑soda paste to clean them. This often restores heat to a stubborn burner.

4. Check the wiring. With the hob unplugged, remove the rear cover. Make sure all wires are snug and there are no signs of charring. If you see any damaged insulation, stop there – it’s a sign you need a qualified electrician.

5. Test the thermostat. If you have a multimeter, set it to continuity. With the hob unplugged, touch the probes to the thermostat terminals. No continuity means the thermostat is bad and should be swapped out.

If any of these steps feel uncomfortable, it’s best to call a professional. Working with mains electricity can be dangerous, and a licensed technician will have the right tools and replacement parts.

When you do call us, we’ll send a qualified engineer who knows every make of electric hob on the market. We’ll diagnose the fault fast, give you a clear price up front, and fix the problem in a single visit whenever possible.

Regular maintenance also helps avoid future breakdowns. Wipe the surface after each use, keep the underside free of dust, and give the wiring a quick visual check once a year. A well‑looked‑after hob lasts longer and saves you money.

Whether you’ve tried the DIY steps or just want peace of mind, Nuneaton Appliance Repair Experts are ready to get your hob back in action. We offer fast response times, transparent pricing, and a guarantee on all repairs. Call us today and enjoy cooking again without the hassle of a faulty hob.

Electrician Needed to Replace an Electric Hob? Here’s What You Need to Know

Electrician Needed to Replace an Electric Hob? Here’s What You Need to Know

Thinking about swapping out your electric hob but not sure if you can do it yourself? This article covers whether you need an electrician for the job, what could go wrong if you try it yourself, and what UK regulations say about electrical work. Get the facts, including safety tips and cost insights, before you make a decision. We’ll also break down what happens step-by-step during a professional installation. Don’t risk your kitchen or your safety—find out the right approach.

View More